Posted by SUPERIOR ANODIZING CO.LTD. (74.14.109.74) on April 28, 2008 at 10:08:00:
In Reply to: Re: Clear Anodized Finish Quality posted by David A. Kraft, VP, Anacote Corp on September 12, 2007 at 13:16:47:
: If the parts are clean machined, there should be no problem anodizing them & there should be no need for alloy change.
: One issue - you mention clear, BUT, you mention Class 2 - that means dyed - clear is Class 1.
The " Class " refers to the coating thickness not colour
Min Thickness
Class I 18 Microns (µ)
Class II 10 Microns