Re: proper cleaning and care of anodized alumnium

Subject:

Comments:
: Interior applications : Interior parts can normally be kept clean by wiping them periodically with a soft cloth. If they have not been cleaned for some time, a neutral cleaning fluid and soft cloth can be used, followed by rinsing in clear cold water. They can then be polished with a soft, dry cloth to make them look like new. : Exterior applications : In practice, the frequency with which structural components exposed to the atmosphere should be : cleaned depends on the kind of parts and the aggressiveness of the environment. : For exterior applications where the decorative appearance and protective function are particularly important e.g. porches, entrances, shop fronts, etc., weekly cleaning is recommended. In this case, i.e. : with regular cleaning, it is possible to use clean water and a chamois leather and then wipe the parts down with a soft dry cloth. : Window frames, windowsills and facades must be cleaned regularly, the frequency depending on the : aggressiveness of the environment and the construction of the facades. This is best done with a neutral, synthetic cleaning fluid and a cloth, sponge, chamois leather or soft brush. Then rinse with clear water and rub slightly to dry. : Stubborn dirt can be removed with slightly abrasive cleaning agents or bonded fibres covered with fine neutral polishing powder. : If a preserving agent is applied to the structural components after cleaning, care should be taken that only an extremely thin water repellent film remains. This must not yellow, not attract dust and dirt nor have iridescent effects. Waxes, vaseline, lanolin and similar substances are not suitable. : Multi-purpose cleaners must meet the same requirements. : Soda solutions, alkalis and acids must always be avoided. Abrasive materials, metallic cloths, wire : brushes, etc. should never be used. : Source: Qualicoat Specifications : : I work for a commercial builder here in central FL, the building we are working on has anodized aluminum frames for its windows, sliders and rails and since we are still in construction these items are getting, not only dirty but they have overspray of paint, drywall texture etc and of course scratches from everything... I was told that these could not be repaired once damaged like this, I'm hoping that is not true. I also need to get information on long term care for the owners once we turn over the building. : : So, how can we clean, repair and maintain these surfaces without damaging them further or having to replace them?

Optional Link URL:
Link Title:
Optional Image URL: