Posted by Matt Peloso (137.132.3.9) on January 09, 2008 at 23:04:51:
In Reply to: safety - gas discharged posted by Matt Peloso on January 09, 2008 at 22:22:31:
Assuming hydrogen is escaping so not much of a concern...should the other gases be corrosive and require clearance near the rig?
: I need a number on the amount of and type of toxic gas released for anodizing. Would someone have a reference to some measurements or a formula to give the ppm for the surface area of the part. It will help me with the safety panel who might want us to build a chimney for them....at present our plan is to vent it to the outdoors. Thanks