|
|
|
Nineteenth Annual International Anodizing Conference & Exposition October 5 – 7, 2010 • Montreal, Quebec, Canada
Advancing to the Next Level |
| |
|
| Educational Program |
Educational sessions for the 2010 Anodizing Conference are organized by General Sessions and the following Focus Sessions Tracks: Technical, Environmental, and Scientific.
Below you will find a preliminary scheduled sessions for the 2010 Anodizing Conference. Abstracts are forthcoming.
Focus Sessions
Wednesday, October 6, 2010
1:30 p.m. - 5:00 p.m.
| |
Technical Track |
Environmental Track |
Scientific Track |
1:30 p.m. – 2:00 p.m.
|
Process Controls, Documentation and Verification
Kevin Bodily, METALAST |
Integrate Cleaning with the Processing of Aluminum
and the Environment
Richard Mahn, Houghton Metal Finishing Company
|
Nanoporous Anodic Aluminum Oxide Templates for Nanowire Arrays
Bethanie Hills Stadler, Ph.D.
University of Minnesota |
| 2:00 p.m. – 2:15 p.m. |
Break |
| 2:15 p.m. – 2:45 p.m. |
Innovative, Ecological and
Low-Cost Matte Finish
Walter Dalla Barba, Italtecno Srl
|
Non-Chromium Seals for Clear and Hard Anodized Aluminum
Alp Manavbasi, METALAST
|
Anodized Aluminum Oxide Based Large Area Photo-Detectors
Hau Wang, Argonne National Laboratory, Materials Science Division |
| 2:45 p.m. – 3:00 p.m. |
Break |
| 3:00 p.m. – 3:30 p.m. |
Replacement for the Chromic/Phosphoric Acid (CPA) Test for Sealing Quality
Joakin Oxelbark, Sapa Technologies
|
Steps to an Environmentally More Sustainable Business Model
Michael Ritzenhoff, Seidel |
Formation of Al-based Nanostructured Thin Coatings on Aluminum Substrates using a Micro-arc Deposition Technique
Mathieu Brochu, Ph.D., McGill University
|
| 3:30 p.m. – 3:45 p.m. |
Break |
| 3:45 p.m. – 4:15 p.m. |
Anodizing Difficult Alloys
Fred Schaedel, Anodic Technical Services |
Regulatory Initiatives Impacting Surface Finishing Operations
Jeff Hannapel, The Policy Group |
Prediction of the Accumulation of Pitting Damage on
Aluminum in Aqueous Solutions
Digby Macdonald, Center for Electrochemical Science and Technology,
Department of Materials Science and Engineering,
Pennsylvania State University
|
| 4:15 p.m. – 4:30 p.m. |
Break |
| 4:30 p.m. - 5:00 p.m. |
Aerospace Anodizing Processes
Warren J. Fullen, Boeing
Gary Kriesch, Walgren Company
Earl Turns, Earl W. Turns & Associates |
Environmental Regulations in Ontario
Ross Borthwick, Premier Environmental Services Inc. |
Metallurgical Assessment of Acid Etch as Anodizing Pretreatment
Nick Parson, Rio Tinto Alcan
|
|
